GMW15548

Description / Abstract: GMW15548, 6th Edition, October 2020 - Polypropylene Copolymer – Mineral Filled, UV Stabilized, Heat Stabilized

Note: Nothing in this standard supercedes applicable laws and regulations.

Note: In the event of conflict between the English and domestic language, the English language shall take precedence.

Purpose/Material Description.

This specification describes the properties of injection moldable, mineral filled polypropylene copolymer, Ultraviolet (UV) stabilized, heat stabilized.

Types. The classification into groups is according to the different properties as described in Table 1 following 3.6.

• T4 has higher tensile modulus (stiffness) than T2

• T6 has higher tensile modulus (stiffness) than T2 and increased scratch resistance than T2 and T4

• T6A has increased scratch resistance than T6B

• T6C is paintable

Symbols.

The material abbreviations according to ISO 11469 are shown in Table 1.

Applicability.

Typical applications include the following:

• Interior Trim Components

Remarks.

None.